| How to Hide a Microwave Posted: 03 Apr 2018 01:00 AM PDT Microwaves are one of those appliances that many people consider necessary, but that are bulky and can take up a lot of precious kitchen space. You may be wondering about the best ways to keep your microwave hidden and out of your way when it's not in use. Hide your microwave by modifying one of your kitchen cabinets, or by stashing it behind other doors or under your counters. EditModifying an Existing Cabinet - Check your microwave's manual about ventilation requirements. Microwaves have ventilation requirements for when they are in use; some microwaves don't need any extra because they have some at the bottom under the legs, but others need back or side ventilation.
- Your owner's manual should tell you if you need to create ventilation space while hiding your microwave, so take this into consideration when deciding where to cut holes in your cabinet.[1]
- Choose a cabinet where you'd like to hide your microwave. Ideally your cabinet will already fit your microwave well and will hang in a place near an outlet that you can use to plug the microwave in. Take measurements of width and depth your microwave and the cabinet you would like to use.
- As long as your cabinet is wide enough for your microwave, you can add more depth to it by cutting a hole in the back of the cabinet for the back of your microwave to go through.[2]
- Cut a hole out of the back or side of your cabinet for wiring. Using a ruler, measure where the wiring coming out of the microwave will exit the back or side of your cabinet. Draw a small box on the back or side of the cabinet for the cuts that you will make.
- Carefully use a jigsaw to make the cuts in the lines on the cabinet. Be sure to follow all safety instructions in the jigsaw manual.[3]
- Cut a bigger hole out of the back of your cabinet if necessary. If your cabinet is not quite deep enough for your microwave, cut a microwave-sized hole into the back of the cabinet with your jigsaw.
- With a ruler, draw lines on the back of your cabinet for a box slightly larger than the size of your microwave. Carefully use your jigsaw to cut on the lines, being sure to follow all the safety instructions in your jigsaw manual.[4]
- Add wood to the back of the cabinet if necessary. If you cut a hole in the back of the cabinet to allow for more depth, and your microwave sticks out in the back, you will need to add extra wood to the back of the cabinet so it hangs flush with the wall when you rehang it. With a ruler, measure the distance that your microwave sticks out in the back. This is how wide you will need the wood that you add to be.
- You can cut scrap 2x4" pieces of wood to fit the back of your cabinet. You will want to add wood to the top of the back, as well as a piece in the middle of the back above the back of the microwave.[5]
- Add or reinstall your shelves if necessary. If you removed any shelves from your cabinet to make room for the microwave, you can reinstall them by using the same hardware.
- If you're hanging a new shelf in the cabinet, measure the width of your cabinet and find a shelf with some shelf-hanging hardware at your local hardware store.[6]
- Rehang your cabinet. Your cabinet should be all ready to drill back into place. Using your drill and the cabinet hardware, rehang your cabinet where it was. If you're choosing a new place for the cabinet, be sure there is support behind the wall for the cabinet screws to go into.[7]
EditHiding Your Microwave Behind Other Doors - Create space in your existing appliance pantry if you have one. Some homes come equipped with an appliance pantry. This is usually a tall cabinet with doors that open out or slide back to reveal shelves that sometimes slide out too.
- Your microwave can most likely fit onto one of these shelves, as they are made for putting appliances into.[8]
- Install an appliance pantry if you don't already have one. If you don't already have an appliance pantry, you can have one installed. You would want to consider this a major construction project for your kitchen, and may want to consult a remodeling company if you decide to do this.[9]
- Create an appliance garage for a hidden countertop microwave. An appliance garage keeps your microwave on the counter and underneath cabinets but has sliding doors that come down over your appliances when they're not in use. You can buy sliding track doors for appliance garages at DIY hardware stores such as Home Depot or Lowe's.
- Be sure to look for door models that match the rest of the cabinetry in your kitchen.[10]
EditHiding Your Microwave Below a Counter - Use a shelf in your lower kitchen cabinets for a classy look. Microwaves look nice and out of the way on a shelf below the counters along your kitchen walls. Determine where you would plug the microwave in from a lower cabinet shelf and drill a hole in the back or side of the cabinet for the microwave wiring. You can keep cabinet doors on to really hide the microwave, or leave them off.
- Homes with elderly people or small children may not want a low-sitting microwave, as it involves lots of bending to reach, and small children may be inclined to play with it.[11]
- Build a sliding shelf for your microwave if you have extra drawer space. You can replace drawer spaces in your kitchen with a sliding shelf large enough for your microwave, or simply build the sliding shelf into a lower cabinet.
- Measure the area where you'd like to put the microwave and either build or order the sliding shelf that will fit the space. Mount the sliding brackets to the sides of the cabinet area to install your shelf.[12]
- Place your microwave under your kitchen island if you have one. If you have a kitchen island, you may already have built-in space underneath it for appliances complete with outlets.
- If you have an island that has extra hanging counter space with nothing underneath, consider installing a cabinet there where you can place your microwave.[13]
EditSources and Citations
Cite error: <ref> tags exist, but no <references/> tag was found
|
| How to Cancel an Appointment Posted: 02 Apr 2018 05:00 PM PDT Whether it's because of an unexpected delay, travel issues, or a schedule mix-up, canceling plans is sometimes inevitable. Breaking the news to the person you are missing an appointment with can be daunting, but if you are honest and polite and let them know as soon as possible, they will most likely be understanding. Reschedule at the same time you cancel or as soon as you can, and offer to meet somewhere closer to where they are to make rescheduling more convenient for them. EditCanceling Your Appointment Politely - Contact the person your appointment is with as soon as you can. The longer you wait to cancel your appointment, the more you are inconveniencing the person you are meeting with. Giving plenty of notice will show that you respect them and their time.
- Call to cancel your appointment personally if you are giving short notice. If you are giving less than a day's notice, you should call the person your appointment is with directly. Emailing, texting, or having an employee notify them for you can come off as inconsiderate when you are inconveniencing them with a last-minute change.[1]
- Offer a sincere apology. Even if you are giving plenty of notice, let them know you are sorry for canceling the appointment. They may have given up other plans to meet with you, and you may have caused them an inconvenience by canceling.[2]
- A brief, simple apology is enough, like "So sorry I can't make it work this time."
- Avoid using vague language or saying that you "might" not be able to make the appointment. It's better to be straightforward and honest.
- Explain briefly why you can't make it. If you have a good reason, like travel problems or a sickness, simply let them know that's why you had to cancel. If you have a less acceptable reason, like you just forgot about the appointment or accidentally double-booked yourself, give a general explanation such as "Something came up that I can't get out of."[3]
- There's no need to go into great detail about why you are canceling, even if you're being honest. Elaborating too much can make it seem like you're making something up.[4]
- Never say that "something more important came up," or anything to that effect.
- Don't make up excuses. You'll run the risk of the other person finding out you weren't honest, which could worsen the situation.
- Let them know you value their time. Make sure to emphasize that you appreciate them scheduling the appointment with you, and that you regret having to cancel. Make it clear that you recognize their time is not unlimited.
- This is especially important if the other person was meeting with you as a favor, like a professional in your field with more experience.[5]
EditRescheduling for Another Time - Offer to reschedule when you cancel. Not only will this save you the hassle of trying to reschedule later, it will show that you are still interested in the appointment. When you call or email to cancel, you should end by saying that you would like to reschedule at the other person's convenience.[6]
- List a few time slots you are available to meet in. You should do your best to accommodate the other person's schedule, but it's helpful to give them a few options to choose from. Figure out 3 or 4 times you are available, and ask whether those times are convenient for them.[7]
- For instance, you could say, "I'm free Friday after 2pm, anytime Monday, or Tuesday between 1pm and 5pm. Do any of those work for you, or is there another time that would be more convenient?"
- Offer to meet somewhere closer to them. To compensate for canceling your first meeting, it's a good idea to try and make the rescheduled appointment more convenient for them somewhere. Offer to meet them at their office or somewhere close to where they will already be at that time.[8]
- You can also suggest meeting by Skype or Google Hangouts if the person you are trying to reschedule with is very busy or far away.[9]
- Choose a time when you know you can make it. After canceling once, it may be even more irritating or inconvenient to cancel again, and you may damage your standing with the person your appointment is with. Look at your schedule carefully and make sure the time you agree to will work for you, and there is not a strong chance of anything unexpected coming up during that time.
- If you don't have anything booked in December, for instance, but you know that your schedule tends to fill up around the holidays, it's best not to reschedule your appointment for that time.
- Make a note of the time you choose to meet. Once you decide on a time to reschedule your appointment for, put it into your calendar. You may also want to make a physical note and put it somewhere you will see it to remind yourself.[10]
- Thank them for their patience when you do meet. Start your appointment off by thanking the person or people you are meeting with for rescheduling. There's no need to apologize again, but showing that you appreciate them for working with your schedule will indicate that you value their time.[11]
- You should avoid canceling appointments whenever possible, as it can reflect badly on you and may damage your connections.[12]
- If you are meeting with someone whose services you are paying for, like a consultant, check to see whether they have a cancellation policy.
EditSources and Citations
Cite error: <ref> tags exist, but no <references/> tag was found
|
| How to Dance the Jitterbug Posted: 02 Apr 2018 09:00 AM PDT The jitterbug, also called single time swing, is a lively dance that originated in the early 1900s and is still popular today. With its smooth, simple steps and upbeat music, this light, fun dance can be enjoyed by dancers of all ages. EditIn a Hurry? The best way to learn the jitterbug is to learn the basic rhythm and rock-step. Bend your knees and tilt your back slightly forward. Step to one side and bend your knees a little deeper, then repeat on the other side, to a count of "1 and 2 and." Add in the rock-step by moving one foot back, quickly lifting the front foot, and then moving the back foot forwards again to a quick count of "1, 2, 1." Practice without music first, learning the rhythm in your body, then turn on the tunes! To learn how to do a turn, handpass, and swing hammerlock as both the leader and the follower, read on! EditMastering the Basic Single Swing - Bend your knees and tilt forward. You should have a strong core and light legs while you're doing the jitterbug. Bend up and down at the knees, keeping your body aligned. Keep your back straight but tilt it forward from the hips, at about a 60-degree angle.[1]
- This will be your general body position when you're doing the jitterbug. It should feel easy, loose, and natural for your body.
- Pulse slightly at your knees with your weight in the balls of your feet. To get comfortable in the position, gently bounce up and down on your knees, like you're bouncing to music. Keep your weight in the balls of your feet, but don't rise up onto your toes; let your heels remain on the ground.[2]
- You can lift one heel off the ground, then the other, to make sure that you're fully balanced on the balls of your feet.
- Shift your weight from one foot to the other, pulsing in time. Take a small step with one foot, then bend your knees and drop your weight slightly. Repeat with your other foot. If you're practicing the leader's steps, you'll move your left leg first; if you're practicing the follower's, start with your right.[3]
- To give yourself a slight rhythm to rock to, you can say "1 and 2 and," stepping when you say a number and rocking when you say "and."
- This is one of your basic movements in the jitterbug, often called the "slow" movement because you're moving right in time with the beat.
- Remember to maintain your balance and center. To take a step, simply lift your heel up gently and set it down. When you shift your weight, you should be moving your knees from a bent position to an even deeper bend.
- Practice the rock-step by stepping one foot backwards. To move into the second basic step, move one foot slightly behind you. If you're dancing as the leader, step your left foot back. If you're the follower, step your right foot back.[4]
- When you're dancing, you'll move the same foot back every time.
- Lift your front foot, then your back foot. Lift your front foot, springing lightly off the ball of the foot, then lift your back foot. You can lift your knee just slightly as well. Keep your chest and top half still and relaxed.[5]
- Although this is called the "rock-step," you won't actually being rocking your weight back and forth--when you're dancing to music, you won't have time! Instead, stay centered and balanced.
- Go back to your pulse step and shift once to either side. Pop your knees up a bit, letting your body feel the rhythm. Shift back and forth once, moving naturally.[6]
- Step 1 foot back and do 1 rock-step. Put the rock-step together with your pulse by stepping back with one foot. Lightly lift the front foot, then move the back foot forward again.[7]
- If you're leading, move your left foot back; if you're following, step back with your right.
- Count out loud to get the timing down. You should move faster through your rock-step than in your pulse. If you're using the "1 and 2 and" count for your pulse, you can use "1, 2, 1," for your rock-step to pick up the pace.
- Step backwards on 1, lift your front foot on 2, and move your back foot forward on 1.
- Return to your beginning pulse position and repeat. You should end your rock-step back in your beginning position, with both feet spread about shoulder-width apart. Go back into your pulse, doing one count on each side, then try the rock-step again.
- The more you move through these beginning 2 steps, the better you'll get at feeling the jitterbug rhythm. The more advanced steps play off of these, so make sure you feel comfortable with them before moving on!
- Hold one hand with your partner if you're dancing as a couple. Most moves in the jitterbug are easy to do by holding just one hand in the "open" position. Stand facing your partner and join hands, with the leader holding with their left and the follower with their right. Stand close enough together that you can join hands with your arms bent.[8]
- If you're the leader, curl your hand over your partner's so that it's almost sideways. Lay your thumb on top of your partner's hand. The hold should be light and relaxed.
- If you're the follower, lay your hand palm-down in your partner's.
- Try the steps a few times while facing each other. Let your hand move towards your partner while you're moving backwards in the rock-step, staying relaxed and not pulling on your partner's arm.
- Try the step in closed position to dance closer together. The leader's right hand will go around the follower's upper back, while the follower's left hand goes on the outside of the leader's shoulder. You'll still be holding your other hands together, joining the leader's left and the follower's right hand.[9]
- When you do your rock-step, step your front foot back at an angle and rotate your body to open your chest up. Don't step straight back, as this would separate you from your partner.
EditTrying the Follower's Underarm Turn - Start with a basic back and forth and rock-step. Hold your partner's hand and start by doing your back and forth pulse and rock-step. Relax and settle into a rhythm together.
- Remember that you're doing 1 pulse step and 1 rock-step each time. Count out loud so that you and your partner are on the same beat.
- Continue pulling the follower's arm gently forward to start the spin. When you move your back foot forward out of the rock-step, take a larger step forward and pull the follower's arm slightly forward. This will show the follower that you're going to start a spin and help them start their momentum.[10]
- Don't start to lift your arm or spin the follower yet; simply draw them forward by their arm.
- As the follower, step out of the rock-step in the direction that you're being pulled.[11]
- Lift your shoulder up to gently spin the follower. Keep your elbow down to maintain a graceful line, lifting gently from the shoulder and raising your palm just over the follower's head. They will spin out naturally as you raise your hand, then gently bring it back down.[12]
- Raising your elbow and whole arm will make your turn look sloppy. Instead, focus on keeping your elbow bent and raising your palm to just above the follower's head.
- Cross behind the follower as they spin. Take one step as the follower spins, bringing your feet to a natural shoulder-width position. You should be facing your partner as they come out of the spin.[13]
- This isn't strictly necessary--you can do the turn while standing still and your partner will simply spin around fully to face you, but it looks smoother and more graceful to move with them.
- Come out of the spin into a rock-step and continue the dance. Now that you and your partner are facing each other again, come back together rhythmically with a quick rock-step. Transition into the side-to-side pulse to continue the dance.[14]
- If you're a beginner, you can also take a quick break after the turn. Talk to your partner and see how they felt about it and if you can do anything to improve.
- Start your spin with your resting elbow and shoulder as the follower. As the follower, once the leader lifts their arm to start the spin, draw up your free elbow and bend it across your chest. This will help to get your momentum moving in a spin. [15]
- To get into the spin as the follower, simply follow the leader's movements.
- Follow this movement with your upper body as the follower. As your elbow pulls across, allow your shoulders and upper body to follow, then your hips. Turn your back knee towards your front knee and spin on 1 foot, with the other poised behind on the toe.
- Mentally separate your shoulders from your hips. Each part of your body should move separately, following each other naturally.
- You will end the spin facing the leader and ready to keep dancing!
EditDoing an Underarm Turn for the Leader - Start with a side to side step and rock-step. Hold one hand with your partner and get into the rhythm with a few simple side to side step and rock-step combinations. Loosen up your knees and arms and relax into the movements.
- Step out of the rock-step towards the follower's arm. The leader can also spin through an underarm turn! To initiate one, step slightly towards the follower's arm as you come out of a rock-step. At the same time, gently pull their hand towards your opposite shoulder.[16]
- This will let the follower start to move away and behind you, giving you room to start your turn.
- Lift your arm and spin your hand so the palm faces up. Lift the arm that's holding the follower's hand and start to turn your body. This will lift the follower's arm as well, giving you room to rotate underneath. Spin your lifted hand so the palm is facing up, which gives you more flexibility to rotate.[17]
- Bend your knees and move lightly on the balls of your feet as you turn.
- If you're the follower, keep your palm facing down. Take one step behind the back of the leader so that you're facing them as they come out of the turn.
- Try the handpass for a simple, stylish variation. As you come out of your rock-step, take the top of the follower's wrist with your right hand and let go with your left. Step across so that your back is facing your partner and pass their arm around behind you. Switch hands behind your back so that you're holding hands with your left hand again, then spin around to face each other.[18]
- As the follower, follow naturally around the leader's back and slide around to face them as they turn.
- The handpass can be a fun way to mix things up if you and your partner already feel comfortable doing a regular turn.
EditDoing a Swing Hammerlock - Hold both of your partner's hands as you start to dance. Start in the open position and hold both of your partner's hands, instead of just one. Begin by doing some easy side-to-side steps and rock-steps.[19]
- You'd typically hold just one hand in the open position, but for this move, you'll need to be holding both.
- Twist the follower's shoulders slightly one way, then the other. First, do 1 side-to-side step. Then, pull the follower's right arm towards you gently, then push it back while pulling their left arm towards you.[20]
- This twist will help the follower build up some momentum to go into their spin.
- As the follower, swivel your shoulders and hips and allow your body to open up as you turn. You can move your right foot back, then forwards as you turn from side to side.
- Spin the follower from their bent elbow while still holding both hands. From this position, one of the follower's arms will be straight, while the other will be bent. Lift their bent arm and initiate the turn while still holding onto their other hand.[21]
- As the follower, spin from your shoulders and upper body, then your hips and knees. Your other arm will be turning behind your back, but it shouldn't be uncomfortable.
- Flip the follower's bent arm behind their back as they turn. As you turn the follower with your top hand, draw their other arm across their back with your bottom hand. You should rotate your wrist around, flipping their hand so that their palm is facing out.[22]
- Flipping their hand like this makes the turn more comfortable for them and for you.
- End the spin with one arm across the follower's body, holding hands. At the end of the spin, the arm that the follower didn't use to spin around should be crossed behind their back. You should be holding that hand at their opposite hip, reaching across their body.[23]
- Your other hand will still be holding the follower's hand, and you'll both be facing each other.
- Do a rock-step while pushing slightly against the follower's hip. From this slightly twisted position, start a rock-step. When you step forward, push back on the follower's hip at a slight angle, opening up their body.[24]
- This tells the follower that you're about to turn them out of this position. It also helps give them some momentum to carry them out of the turn.
- Spin the follower from her bent arm to come out of the twisted position. As you rock back in the rock-step, gently pull the follower along with you with the hand on their hip. Lift up your other hand as you do so, allowing her to turn underneath it and naturally spin out of the twist.[25]
- Since you've helped the follower gather some momentum by angling their hip, you can try to turn this move into a double turn. Simply continue to hold your hand up as they turns, leading them into a second spin.
- You can let go of their other hand as you turn them, so that you end up in the traditional open position with a one handed hold.
EditPolishing Your Steps - Practice your basic steps without any music first. Before you start dancing to music, make sure you've got the basic steps down. Count out loud to help you find a rhythm and concentrate on perfecting each movement of your body.
- It might feel awkward at first, but mastering the moves without music will create the muscle memory to let you dance smoothly with music and other distractions.
- Dance to upbeat swing music once you feel comfortable. After you've got the basic steps and turns down, you can start putting your moves to music. Look up songs online or look for jive, jitterbug, or swing CDs to try multiple different songs.
- If you're looking for music online, look up "jitterbug music" or "swing dance music."
- Find an instructor at a dance studio to try more advanced steps. If you've gotten down the basic steps and turns and want even more of a challenge, look for a dance studio near you that offers lessons. You can also look online for helpful videos, or buy a DVD that teaches you more advanced moves.
- Search for "jitterbug dance lessons near me" online to find a dance studio that offers lessons. If you can, call ahead of time to see what moves will be taught and whether they'll be challenging enough for you.
- Try out your steps at a swing club to dance with others. When you're ready to show off your moves to others, head to a local swing club with a partner, or couple up once you get there. Swing dance clubs are lively places to try out an older but fun way of dancing, so don't worry if you're not an expert yet--just have fun!
- You can search online for swing dance clubs by searching "swing dance clubs near me."
EditSources and Citations
Cite error: <ref> tags exist, but no <references/> tag was found
|
Nenhum comentário:
Postar um comentário